Open up Audiograbber in the normal manner & select line-in recording.

Of course the mixer doesn't work.

The trick is to right mouse click the loudspeaker icon on the task bar click on recording devices and right mouse click again to show disabled devices and disconnected devices and click on these to enable them.

In the case of Creative soundcards you will want to enable "What U Hear" so right click on "What U Hear" click on the properties box and go to the level tab to adjust the level of the volume for recording.

I hope that you can understand this.

Look here for an example:-
http://i5.photobucket.com/albums/y198/southport/capture.jpg

[This message has been edited by Grover on 08 March 2007 @ 18:47]